FSIP-76-1244-5561 : Curtis Controller 1244-5561 G - 36/48V 500A (5K-0) SX CTL
PRODUCT DESCRIPTION
This is a generic controller denoted by "G" thus the following details are required to assess whether the controller is correct for the vehicle.
Vehicle Make
Vehicle Model
Vehicle Serial #
Motor Make
Motor Model
System voltage
The MultiMode motor speed controller, Curtis 1244-5561, is used for separately excited (SepEx) motors. This controller is cost-efficient, only requires simple installation, and operates silently when utilized in controlling the speed, brake, and torque of the motor. This controller can also be used with CAN Bus communication systems. In the industry, controllers under Curtis 1244 can be applied to vehicles used for material handling with order pickers and counterbalance trucks as an example.
The Curtis 1244-5561 is a 36/48 volt model with 500 amperes and utilizes a 5K-0 ohms throttle input. The controller weighs 3.9 kg and is 229 mm in length, 178 mm in width, and 81 mm in depth. It provides a better driving experience due to embedded and optional features, which can be added according to preference and application demand.
The controller can now be purchased here in Cloud Electric, your one-stop shop for all your electric component needs. Cloud Electric is a leading distributor of electronic components in North America. We take pride in our informative product descriptions, pricing, and shipping speed.
SPECIFICATIONS
|
NOMINAL VOLTAGE
|
36-48 V
|
|
MINIMUM ELECTRICAL ISOLATION
|
Due to Heatsink: 500 VAC
|
|
CURRENT
|
Armature: 500 A
|
|
RATING
|
|
|
|
Armature: 500 A
Field: 50 A
|
|
|
160 A
|
|
KSI INPUT
|
|
|
|
24-36 V systems: 16.8 V
|
|
|
W/o Programmer: 160 mA
W/ Programmer: 200 mA
|
|
LOGIC INPUT
|
|
|
|
High: Greater than 7.5 V
Low: Less than 1 V
|
|
|
10 mA
|
|
CURRENT LIMIT RANGE
|
400-700 A
|
|
OPERATING FREQUENCY
|
16 kHz
|
|
THROTTLE INPUT
|
5K-0 ohms
|
|
TEMPERATURE
|
|
|
|
-40°C to 50°C
|
|
|
-25°C
|
|
|
85°C
|
PHYSICAL SPECIFICATION
|
WEIGHT
|
3.9 kg
|
|
DIMENSION
|
|
|
|
229 mm
|
|
|
178 mm
|
|
|
81 mm
|
|
PACKAGING
|
IP64 or IP67
|
FEATURES
|
Feature
|
Purpose
|
|
Brake Control and Variable Drive Speed
|
Allows accurate vehicle control for an improved driving experience
|
|
Half-Bridge Armature and Full Bridge Field Power MOSFET
|
Highly efficient and noiseless operation with a wide range of control
|
|
Regenerative Braking
|
Increases battery life allowing the vehicle to operate longer with just a single charge while preventing issues such as motor heating and brush wear
|
|
Curtis 1307
|
Programmable control allows testing and diagnostics
|
|
Two Fault Outputs
|
On a display mounted remotely, the diagnostics are displayed
|
|
Continuous Current Control in the Armature
|
This reduces brush wear and arcing
|
|
Automatic Braking
|
Once the throttle is positioned in other directions, the brake is automatically initiated creating a smooth change in direction which improves the safety of the vehicle
|
|
Load Compensation, Deceleration Rate, and Restraint
|
Prevents runaway conditions
|
|
MultiMode input
|
User-select feature offering four operating personalities and the top speed of the vehicle is controlled
|
|
Programmable
|
Helps in matching characteristics with the SepEx it will be used with
|
|
Cutback Function (Undervoltage and Linear Temperature)
|
Provides protection from power loss from any temperature condition
|
|
Static Return to Off and High Pedal Disable
|
If the vehicle is started in a faulty condition, this feature disables it from operating.
|
|
Adjustable Creep Speed
|
In each mode, the creep speed can be tweaked from 0 to 25 percent
|
|
Power-On Self-Test
|
There is continuous monitoring and diagnostics when operating
|
|
Watchdog Circuits (Internal/External)
|
The software operates properly
|
|
Protected Components
|
All components are properly packaged to prevent internal damages
|
|
Compatible with CAN Bus
|
The CAN Bus is configurable
|
OPTIONAL FEATURES
ACCESSORIES COMPATIBLE WITH CURTIS 1244
Curtis 1307 - a programmer that assists in parameter control, testing, and conducting system diagnostics.
DIMENSIONS
WIRING DIAGRAM
