Home > Controllers > Kelly >

KELLY-MINI-KLS-N-SERIES: Mini KLS-N Sinusoidal Brushless Permanent Magnet Motor Controller (12V-72V, 120A-300A)
KELLY-MINI-KLS-N-SERIES: Mini KLS-N Sinusoidal Brushless Permanent Magnet Motor Controller (12V-72V, 120A-300A)
 
Alternative Views:




Product Code: KELLY-MINI-KLS-N-SERIES

Voltage


Peak/Continuous Current


CAN Bus Option



Qty:  
Description
 

The Mini KLS-N is a compact motor controller designed for small electric vehicles such as electric bikes or scooters. It is produced by Kelly Controller, a company that specializes in the design and manufacture of motor controllers for electric vehicles. The controller features a range of protective functions, such as overcurrent protection and short circuit protection, to ensure safe and reliable operation. Additionally, the Mini KLS-N includes a variety of customizable settings, allowing users to fine-tune the controller to their specific needs.

Models: MINI-KLS2412ND, MINI-KLS2412NE, MINI-KLS2420ND, MINI-KLS2420NE, MINI-KLS2430M, MINI-KLS4812ND, MINI-KLS4812NE, MINI-KLS4820ND, MINI-KLS4820NE, MINI-KLS4830M, MINI-KLS7225M

Product Details

Kelly Mini KVD Trapezoidal Brushless Motor Controller

ModelNominal VoltageMax Operating VoltagePeak Current
(1 Minute)
Continuous CurrentCooling TypePrice
MINI-KLS2412NV12V-24V9V-32V120A80AConvection Cooling96.03
MINI-KLS2412ND12V-24V9V-32V120Aup to 80A*Conduction Cooling96.03
MINI-KLS2420NV12V-24V9V-32V200A100AConvection Cooling125.13
MINI-KLS2420ND12V-24V9V-32V200Aup to 100A*Conduction Cooling125.13
MINI-KLS2425M12V-24V9V-32V250A90A**Convection Cooling144.53
MINI-KLS2430M12V-24V9V-32V300A100A**Convection Cooling163.93
MINI-KLS4812NV36V-48V27V-60V120A80AConvection Cooling96.03
MINI-KLS4812ND36V-48V27V-60V120Aup to 80A*Conduction Cooling96.03
MINI-KLS4820NV36V-48V27V-60V200A100AConvection Cooling125.13
MINI-KLS4820ND36V-48V27V-60V200Aup to 100A*Conduction Cooling125.13
MINI-KLS4825M36V-48V27V-60V250A90A**Convection Cooling144.53
MINI-KLS4830M36V-48V27V-60V300A100A**Convection Cooling163.93
MINI-KLS7220M48V-72V36V-86V250A75A**Convection Cooling144.53
MINI-KLS7225M48V-72V36V-86V250A85A**Convection Cooling173.63
Note:
  • * Depends on conductive heat sink.
  • ** Continuous current can be much higher with airflow.

Features

  • Intelligence with powerful microprocessor.
  • Synchronous rectification, ultra low drop, fast PWM to achieve very high efficiency.
  • Electronic reversing.
  • Voltage monitoring on 3 motor phases, bus, and power supply.
  • Voltage monitoring on voltage source 12V and 5V.
  • Current sense on all 3 motor phases.
  • Current control loop.
  • Hardware overcurrent protection.
  • Hardware overvoltage protection.
  • Configurable limit for motor current and battery current.
  • Low EMC.
  • Battery protection: current cutback, warning and shutdown at configurable high and low battery voltage.
  • Rugged aluminum housing for maximum heat dissipation and harsh environment.
  • Rugged high current terminals, and rugged aviation connectors for small signal.
  • Thermal protection: current cut back, warning and shutdown on high temperature.
  • Controller can do Auto_Identify for different degrees of hall sensors.
  • Configurable high pedal protection: the controller will not work if high throttle is detected at power on.
  • Current multiplication: Take less current from battery, output more current to motor.
  • Easy installation: 3-wire potentiometer will work.
  • Standard PC/Laptop computer to do programming. Standard tablet with Android OS can also be used to do programming. Need a Z-TEK USB TO RS232 cable for connecting the controller to the tablet.
  • User program provided. Easy to use. No cost to customers.
  • Support motors with any number of poles.
  • Up to 40,000 electric RPM standard. (Electric RPM = mechanical RPM × motor pole pairs; Motor pole pairs = Motor poles ÷ 2).
  • Mini KVD-N:Dust and water protected under sealed condition, IP66

Specifications

  • Frequency of Operation: 16.6 kHz
  • Standby Battery Current: < 0.5 mA
  • 5V or 12V Sensor Supply Current: 40 mA
  • Configurable battery voltage range, B+
  • Standard Throttle Input: 0-5 Volts (3-wire resistive pot), 1-4 Volts(hall active throttle)
  • Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5 V signal.
  • Full Power Operating Temperature Range: 0°C to 70°C (MOSFET temperature)
  • Operating Temperature Range: -40°C to 100°C (MOSFET temperature)
  • Max Battery Current: Configurable

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Controllers > Kelly
Controllers
EV Main Components
EV Main Components > Controllers